I frequently get asked about the Weber carburetor as a replacement for the Chevette carburetor, so I thought I would post some pictures of the actual Weber 32/36 xxxx carburetor. They are extremely similar in design, but the differences are subtle enough that you could mistake them at a glance. A lot of parts will interchange, but not all, like the air horn gasket for example. The bolt pattern is the same, so the carb is a bolt on to the Chevette 2bbl manifold.

                             Top of carb                                         Top of carb with air horn installed

                            Primary side                                                        Secondary side

                            Throttle side                                                                 Bottom of carb

        Fuel filter/screen on bottom of air horn                             Inside view of float bowl

Really cool removable idle jet ( both sides ! )    Screw plug above the accelerator pump check ball

         Accelerator pump discharge nozzle                              Power valve assembly

( clockwise from the top ) A plain Chevette 5200, computer feedback 6510, and the Weber 32/36 xxxx

You can see pictures of the Chevette carbs on my other pages.

Back